16.02.15-Technical-support-Aquacut

Aquacut and Sodium Bicarbonate Settings 
  1. When setting the Aquacut's SPEED control ensure the needle on your ABC meter, located on the front of your machine, rests within the middle of the A position. 
  2. Adjust the POWDER control to position 1. This should be your starting position. You may need to make a slight adjustment to the POWDER control to achieve optimum cleaning.   
NOTE: Ensure you ONLY use the silver hand piece when using Sodium Bicarbonate. DO NOT use the green hand piece as it was not designed to be used with Sodium Bicarbonate.
Velopex on Facebook
Velopex on Twitter
Velopex on Youtube
Velopex on Linkedin
You can now follow us on:
|
|
Site Map
Terms of Use
New SGS Logo1
Website design by SiteBuilder Bespoke