Aquacut and Sylc Settings 
  1. When setting the Aquacut's SPEED control ensure the needle on your ABC meter, located on the front of your machine, rests between the A and B positions. 
  2. Adjust the POWDER control to position 1. This should be your starting position. You may need to make a slight adjustment to the POWDER control to achieve optimum cleaning.   
NOTE: Ensure you ONLY use the silver hand piece when using the Sylc powder. DO NOT use the green hand piece as it was not designed to be used with the Sylc powder.
Velopex on Facebook
Velopex on Twitter
Velopex on Youtube
Velopex on Linkedin
You can now follow us on:
Site Map
Terms of Use
New SGS Logo1
Website design by SiteBuilder Bespoke